SD09 - SpanDek Anchor

The SD09™ SpanDek® roof anchor is a surface mounted stainless steel roof anchor to suit Lysaght Spandek® trapezoidal ribbed roof sheeting with a minimum base metal thickness (BMT) of 0.42mm. The anchor installs with a cordless drill in as little as three minutes.

SD09 4The SD09™ SpanDek® roof anchor requires no additional flashing kit and is manufactured from Stainless Steel. The patented surface mounted design allows for easy retro-fitting and the SD09 SpanDek® roof anchor can be supplied powdercoated to Colorbond colours matching the roof sheeting for a more inconspicuous and integrated application.

The roof sheeting for the SD09™ SpanDek® roof anchor must continually span a minimum three battens/purlins providing height safety in fall arrest and fall restraint applications. The anchor is rated to 15kN for single person use complying with Australian Standard AS1891.4.

The SD09 SpanDek® roof anchor is limited to a 360 degree use and is not to be used for industrial rope access or work involving abseiling.

Specifications:

  • Complies with AS 1891.4
  • 14 Ga. 304 Stainless Steel
  • 15kN - Rated for single person Fall Arrest
  • Fits Lysaghts SpanDek® or TrimDek® roof sheeting
  • Patented design allows for easy retro fitting
  • Installation is easy as it is surface mounted
  • EPDM separation/flashing kit
  • Can be powdercoated to all Colorbond colours
  • Includes Installation Manual/Tech Data Sheet
  • FOR SINGLE PERSON USE ONLY

Installation Diagram: 

SP09 Diag


 

Technical Data Sheet:

Installer’s Certificate Download:

SD-09 Roof Anchor

Anchor Installation Certificate Download