RD08 - RoofDek Anchor

The RD08TM RoofDek® roof anchor is a surface mounted stainless steel roof anchor to suit Lysaght Kliplok 700® series trapezoidal ribbed roof sheeting with a minimum base metal thickness (BMT) of 0.48mm. The anchor can also be used on plywood roof decks for American Shingles or membrane roofs. The anchor installs with a cordless drill in as little as three minutes.

RD08 400311The RD08TM RoofDek®roof anchor requires no additional flashing kit and is manufactured from Stainless Steel. The patented surface mounted design allows for easy retro-fitting and the RD08TM RoofDek® roof anchor can be supplied powdercoated to Colorbond colours matching the roof sheeting for a more inconspicuous and integrated application.

The roof sheeting for the RD08TM RoofDek® roof anchor must continually span a minimum three battens/purlins providing height safety in fall arrest and fall restraint applications. The anchor is rated to 15kN for single person use complying with Australian Standard AS1891.4.

The RD08TM RoofDek® roof anchor is limited to a 360 degree use and is not to be used for industrial rope access or work involving abseiling. It must not be used on sheets longer than 10 metres due to expansion and contraction.

Specifications:

  • Complies with AS 1891.4
  • 14 Ga. 304 Stainless Steel
  • 15kN - Rated for single person Fall Arrest
  • EPDM separation/flashing kit
  • Fits Lysaghts Kliplok® 700 series roof sheeting
  • Can be powdercoated to all Colorbond colours
  • Patented design allows for easy retro fitting
  • Includes Instruction Manual/Tech Data Sheet
  • Installation is easy with surface mounted installation
  • FOR SINGLE PERSON USE ONLY!

 

Installation diagram:

Technical Data sheet

RD08 Installation Diagram

RD-08 Roof Anchor