KL08 - Kliplok Anchor

The KL08 Kliplok® roof anchor is a surface mounted stainless steel roof anchor to suit Lysaght Kliplok® trapezoidal ribbed roof sheeting with a minimum base metal thickness (BMT) of 0.48mm. The anchor installs with a cordless drill in as little as three minutes.

KL08 SP Photo
The KL08TM Kliplok®roof anchor requires no additional flashing kit and is manufactured from Stainless Steel. The patented surface mounted design allows for easy retro-fitting and the KL08TM Kliplok® roof anchor can be supplied powdercoated to Colorbond colours matching the roof sheeting for a more inconspicuous and integrated application.

The roof sheeting for the KL08TM Kliplok® roof anchor must continually span a minimum three battens/purlins providing height safety in fall arrest and fall restraint applications. The anchor is rated to 15kN for single person use complying with Australian Standard AS1891.4.

The KL08TM Kliplok® roof anchor is limited to a 360 degree use and is not to be used for industrial rope access or work involving abseiling. It must not be used on sheets longer than 10 metres due to expansion and contraction.


  • Complies with AS 1891.4
  • 14 Ga. 304 Stainless Steel
  • 15kN - Rated for single person Fall Arrest
  • Fits Lysaghts KlipLok® roof sheeting
  • Patented design allows for easy retro fitting
  • Surface mounted for easy installation
  • EPDM separation/flashing kit
  • Can be powdercoated to all Colorbond colours
  • Includes Installation Manual/Tech Data Sheet

Installation diagram:

KL08 700 Diag

Technical Data Sheet:

Installer’s Certificate Download:

KL-08 Roof Anchor

Anchor Installation Certificate Download